Automation

Wangaratta Landfill Installs Remote Wireless Monitoring Technology

Melbourne, VIC, Sept 4, 2015– After an in depth investigation and a review of available technologies the Rural City of Wangaratta in Victoria selected Oleumtech wireless, battery powered sensors, an Oleumtech Wireless Gateway and a Brodersen RTU32 from Automation Group to monitor groundwater and leachate ponds at the EPA licensed Bowser landfill.

“It is a challenging site as it divided in two by the Sydney to Melbourne four lane Hume Highway, which was a major reason for the requirement of a wireless system,” said Oleumtech Product Specialist at Automation Group, Mr. Graeme Lane.

Wireless Landfill Monitoring

EPA licensed landfill at Bowser,  6 kilometres north of Wangaratta, has been operating since the early 1990s, accepting waste from Council’s kerbside collection service, transfer stations, and from commercial waste contractors. It has an estimated remaining life of around 10 years, if current practices and waste volumes continue. A pipe connection has been installed between the Leachate Ponds and the sewer system to allow for excess leachate to be disposed of more cost effectively after major rain events. This meant that the EPA required data to be logged and reported from the sumps located around both an active landfill and an unused landfill to ensure compliance with the landfill license.

Solar powered pumps extract ground water on both sides of the highway and transfer it for settling into Leachate Ponds. A decision was made to install a wireless remote monitoring system so that the council did not have to undertake expensive digging works or interrupt the highway.

Solar powered pumps extract ground water on both sides of the highway and transfer it for settling into Leachate Ponds. Seven Oleumtech Discreet Wireless Transmitters were installed to manage the reporting of flow metering data from the sumps. They are connected to existing flow meters and vacuum pump blowers across the site. The existing field flow meters provide “pulse” or “count” output (i.e. 1 pulse output = X litres of flow), and the Oleumtech Discreet Wireless DJ1 units transmit the counter inputs via low power 900MHz radio links to a Oleumtech Wireless DH2 Gateway. The Wireless DH2 Gateway “stores” this information in Modbus register locations and uses a serial connection to link to a Brodersen RTU32.

The Brodersen RTU32 reads the Modbus registers and displays the required data on a local HMI interface via a 15” touch screen monitor. The RTU32 has a logic application running that ensures data is scaled and stored to enable the creation of daily, weekly and monthly reports. The reports are stored in the Brodersen RTU for 10 years and can be viewed via the local HMI interface or retrieved and viewed via the RTUs web server or FTP server.

The RTU32 is connected to the council’s corporate WAN, which allows the RTUs Email interface to send reports to relevant staff at the start of each week and every month for the previous week or month,” said Brodersen product Specialist at Automation Group, Mr. Paul Denton.

Secure remote access is also provided for remote support, allowing changes to the RTUs application logic and setup to be made remotely if required.

Wireless landfill groundwater monitoring

About Automation Group

Automation Group is a privately owned group of companies that specialises in providing electrical and automation products to utilities, mining and energy sectors as well as providing comprehensive support and technical services to contractors, integrators and end users. Automation Group works with partner Civil and Electrical Contractors in various local government, mining, water industry, industrial and energy sectors; providing switchboards and automation engineering as well as high quality, premium automation products to deliver to their customers collectively.